Server blade virtual devices tab
Virtual Power
|
Button |
Description |
|---|---|
|
Momentary Press |
This button mimics a physical momentary press of the power button on the server blade. Clicking this button powers the server blade on or off gracefully. |
|
Press and Hold |
This button mimics a physical press and hold of the power button on the server blade. Clicking this button forces the server blade to shut power off without regard for first shutting down the OS before turning power off. This option is not available when the server blade is off. |
|
Cold Boot |
Clicking this button immediately removes power from the system. This option is not available when the server blade is off. |
|
Reset |
Clicking this button performs a system reset. This option is not available when the server blade is off. |
UID Light
Clicking Toggle On/Off turns the UID light on the server blade on (blue) or off (gray) for identification of the selected server blade.
DVD Drive
|
Column |
Description |
|---|---|
|
Connect to Device |
The menu enables you to connect or disconnect the shared DVD drive by selecting Connect to Enclosure DVD or Disconnect DVD Hardware. |
|
iLO DVD Status |
This field indicates whether or not the server blade has a Virtual Media connection. Possible values are Connected or Disconnected. A status of Incompatible Firmware means the DVD feature is not supported with the iLO firmware installed on the device. |
|
Device or Image URL |
This field displays the current Virtual Media connection of the blade. Possible values are Virtual Media Applet is connected, Feature not supported on Integrity iLO version x.xx, SSH is disabled on this blade’s iLO processor, Upgrade ProLiant iLO version x.xx to 1.30 or higher, Enclosure DVD, Tray Open or No Media, or URL to USB key ISO image file.1 |
|
1NOTE: The actual iLO firmware version is shown in the format x.xx. |