Interconnect Bay Summary screen
In the Enclosure Information menu, the Interconnect Bays category lists all the interconnect devices within the enclosure. Selecting the interconnect bays menu item directly opens the interconnect device list with a grid that shows the status of each interconnect device within the enclosure as well as the UID status, power state, tray type, management URL, and product name. For information about accessing iLO from the Interconnect Bay Summary, see the Interconnect Bay Status tab of this guide.
The checkbox in the first column on the top row toggles all checkboxes on or off for all enclosure interconnect devices. This feature is useful if you want to toggle the UID state for all interconnect devices at the same time. Otherwise, the first column contains checkboxes that can be used to select individual interconnects. After the appropriate interconnects are selected, the Virtual Power or UID state dropdown menus can be selected to perform the appropriate action.
The Virtual Power menu enables you to turn an interconnect device on or off. HP recommends that only one device be turned on or off at a time using this feature.
|
Column |
Description |
|---|---|
|
Checkbox |
Click the checkboxes next to the bay or bays where you want to apply the Virtual Power and UID State features. |
|
Bay |
Bay in the enclosure of the corresponding interconnect device. This field displays only populated bays. Empty bays are not displayed in this table. |
|
Status |
Overall status of the interconnect device. Possible values are Unknown, OK, Degraded, and Failed. |
|
UID |
Status of the UID on the interconnect device. Possible values are On (blue) or Off (gray). |
|
Power State |
Power state of the interconnect device. Possible values are On or Off. |
|
Module Type |
Network interface type for the interconnect device installed in this bay. Possible values are Ethernet or fiber. |
|
Management URL |
Address where the interconnect device can be managed and configured for use in the network. |
|
Product Name |
Common descriptive name for the interconnect device. |
Information on this page is current as of the last download. Click Refresh to view updated information.
The UID State menu is used to set the UID LED on the interconnect device. Turning on the UID LED assists in locating a specific interconnect device within an enclosure. These LEDs can be turned on or off one at a time or as groups depending on the checkboxes.
The checkbox in the first column on the top row toggles all checkboxes for all interconnect devices within the enclosure on or off. This feature is useful if you want to toggle the UID state for all interconnect devices on or off. Otherwise, the first column contains checkboxes that can be clicked to select individual interconnect devices. After you select the appropriate interconnect device, you can select a Virtual Power or UID State menu item to choose the appropriate action.